Khadka wax soo saarka dhalada IV dhalo
Khadka wax soo saarka dhalada IV dhalo
Mashiinka duritaanka Preform/Hanger
+ Mashiinka afuufaya dhalada
+ Mashiinka wax lagu maydho-buuxinta
Hordhac
Khadka wax soo saarka dhalada PP ee tooska ah ee IV waxaa ka mid ah qalabka 3, Mashiinka Durida Preform / Hanger, Mashiinka afuufka dhalada, Mashiinka-Dhaqidda-Buuxinta-Sealing.Khadka wax-soo-saarka wuxuu leeyahay muuqaal toos ah, bini'aadannimo iyo caqli leh oo leh waxqabad xasilloon iyo dayactir degdeg ah oo fudud.Wax soo saarka sare iyo qiimaha wax soo saarka hooseeya, oo leh badeecad tayo sare leh oo ah doorashada ugu fiican ee xalalka IV dhalo caag ah.
Fiidiyowga Alaabta
Mashiinka afuufidda dhalada PP
Tallaabada 1
Horudhac rugta soo dejinta:
Waxyaabo badan oo horudhac ah ayaa la geliyaa hopper-ka, ka dib nidaamka quudinta preforms rotary wuxuu gudbiyaa horudhac iyada oo kor loo qaadayo qaadiyaha.Kala qaybsanaan toosan oo madax-bannaan oo hore u qaabeeyey isku dhufashada horudhac horudhac ah oo la xakameeyey.
Tallaabada 2
Habayn gooni ah, wareeg ah, habayn isku-dheelitirnaan isku-dheelitirnaan ah oo loogu talagalay qaab-samaynta:
Qaababka hore waxa loo qaybiyaa masaafo siman oo loo kala qaadaa saxan rotary toos ah, ka dibna lagu wareejay 180 digrii oo u guura preforms kale oo toosan oo habaynaya saxanka.Ma jiro xannibaad horudhac ah oo aan lahayn leexasho leh boos sax ah.
Tallaabada 3
Kuleylinta hore u samee:
Naqshadeynta sanduuqa laydhka ee kululaynta laba saf, kulaylka wanaagsan, beddelka fudud iyo dayactirka.
Tallaabada 4
Preform qaadashada, diyaarinta iyo habka gudbinta dhalada:
Servo nooca furan ee servo gudbinta dabacsan, kamarad faraha ku xajinaysa iyada oo aan lahayn qashinka balaastigga ah iyo budada si loo hubiyo tayada alaabta.
Tallaabada 5
Habka xiridda iyo iskala-bixinta madaxbannaan:
Waxay qabataa naqshadaynta unugga xidhidhiyaha gaarka ah, kuwaas oo aan faragelin midba midka kale.Shaabad wanaagsan oo lagu afuufi karo dhalada, ma daadato.Usha fidintu waxa wada hal nidaam oo servo ah.
Tallaabada 6
Habka furitaanka iyo xidhitaanka caaryada:
Marka preforms loo gudbiyo goobta afuufka dhalada, nidaamka servo waxa uu wadaa gacanta lulida si uu u riixo xiniinyaha furitaanka iyo xidhitaanka dhaqdhaqaaqa si loo gaadho hawlo laba geesood ah.
Tallaabada 7
Habka isku xidhka:
Dhalooyinka la dhammeeyay waxaa laga soo saarayaa goobta afuufka dhalada.Farsameeyaha habka isku xirka ayaa soo qaadaya oo u gudbiya mashiinka mashiinka buuxinta-buuxinta si loo xaqiijiyo wax soo saarka isku xirka auto.
Faa'iidooyinka
1.Servo wadista iyo xasilloonida inta lagu jiro dhaqdhaqaaqa xawaaraha sare, meelaynta waa sax, waarta, iyo kharashka dayactirka waa yar yahay.
2.Camamka faraha ku dhejinaya iyada oo aan lahayn qashinka balaastigga ah iyo budada si loo hubiyo tayada alaabta.
3.Awoodda wax soo saarka sare: kala duwan 4000-15000 dhalo saacaddii.
4.Closed qaab-dhismeedka silsilad isku xiran, masaafada saxda ah ee xarunta, siddooyinka iyo walxaha kale ee shisheeye ma geli karaan silsiladda, dayactirka fudud.
5. Shaabadeynta ma daadinayso hawada, hagaajinaysaa hufnaanta afuufista, gaabin wakhtiga dhalada samaynta.
Tilmaamaha Farsamada:
| Item | Qaabka mashiinka | |||||
| CPS4 | CPS6 | CPS8 | CPS10 | CPS12 | ||
| Awoodda wax-soo-saarka | 500ml | 4000BPH | 6000BPH | 8000BPH | 10000BPH | 12000BPH |
| Dhererka dhalada ugu badan | mm | 240 | 230 | |||
| Dhererka preform ee ugu badan (qoorta leh) | mm | 120 | 95 | |||
| Hawo cadaadis leh (m³/daqiiqo) | 8-10bar | 3 | 3 | 4.2 | 4.2 | 4.5 |
| 20bar | 2.5 | 2.5 | 4.5 | 6.0 | 10-12 | |
| Biyo Qabow (m³/saacaddii) | 10°C (cadaadiska: 3.5-4bar) 8HP | 4 | 4 | 7.87 | 7.87 | 8-10 |
| Biyaha qaboojinta | 25°C (cadaadiska: 2.5-3bar) | 6 | 10 | 8 | 8 | 8-10 |
| Miisaanka | T | 7.5 | 11 | 13.5 | 14 | 15 |
| Cabbirka mashiinka (oo leh Preform loading) | (L×W×H)(MM) | 6500*4300*3500 | 8892*4800*3400 | 9450*4337*3400 | 10730x4337x3400 | 12960×5477×3715 |
Mashiinka buuxinta dhalada ee PP
Tallaabada 1
Xarunta quudinta dhalada
Waxay qabataa isku xirka tooska ah ee u dhexeeya gudbinta raadadka iyo taayirrada quudinta dhalada, waxay ku dhejisaa qoorta si ay u gudbiso, iyada oo hawo nadiif ah oo cadaadis ah si ay u dardargeliso gaarsiinta, ma xoqin.
Tallaabada 2
Saldhigga hawada lagu dhaqo dhalada ionic
Mabda'a nadiifinta iyo habka waa: rogay dhalada;tuubada nuugista ayaa kor u kacda kamarada si ay u daboosho afka dhalada;tuubada hawada ionic sidoo kale waxay kor ugu kacdaa dhalada oo leh kamarad;hawada ciriiriga ah ayaa lagu afuufi tuubada afuufeysa si loo nadiifiyo dhalada dhalada ku jirta;
Isla mar ahaantaana nuugo walxaha ku jira qulqulka hawada ee dhalada.
Tallaabada 3
Goobta buuxinta
Dhalooyinka caagga ah ee la dhaqay waxaa lagu geeyaa goobta buuxinta by manipulator, tuubada buuxinta ayaa raad raac dhalooyin caag ah si loo buuxiyo.Qaybta sare ee saldhigga buuxinta waxaa lagu qalabeeyaa haanta dheellitirka dareeraha cadaadis joogto ah.Marka dareeruhu buuxiyo haanta dheelitirka oo uu gaadho heerka dejinta, dareeraha quudinta pneumatic diaphragm valve wuu xidhmaa.
Tallaabada 4
Saldhig dhalaalidda kulul
Saldhiggan waxa inta badan loo isticmaalaa in lagu xidho daboolka dhalada faleebo ee caag ka dib marka la buuxiyo.Waxay qabataa taargooyin kuleyl ah oo labanlaab ah si ay u kululeeyaan koofiyadaha iyo dekedaha dhalada si gooni gooni ah, waxay ku dhammaynaysaa alxanka-ku-xidhka nooca-kulul ee aan xidhiidhin.Heerkulka kuleylka iyo waqtiga waa la hagaajin karaa.
Tallaabada 5
Saldhig dhalada lagu quudiyo
Dhalooyinka xiran waxaa lagu geeyaa jidka dhalada laga soo saaro iyada oo la sii marinayo saldhigga dhalada, oo gala habka xiga.
Faa'iidooyinka
1.Iyadoo buuxinta saxda ah;daynta saxda ah ee hawada, waxay xakameyn kartaa heerka qallafsanaanta dhalada ka dib marka la nadiifiyo.
2.No dhalo ma buuxin, ma dhalada ma dabool.
3.Waxay gaari kartaa awood ilaa 15,000BPH, iyadoo ku xiran codsiga macaamiisha.
4.Waxaa jira noocyo kala duwan oo koofiyad ah oo lagu dabaqi karo dhalada ugu dambeysa: Koofida Euro ee la xiray;Koofiyadda Waraabka ee xidhan;Koofida daboolka;Joojinta iyo daboolka aluminiumka.
5.Waxay leedahay hawl nadiifin iyo nadiifin GMP oo dhammaystiran.
Tilmaamaha Farsamada:
| Item | Qaabka mashiinka | ||||
| XGF(Q)/30/24/24 | XGF30/30/24/24 | XGF(Q)/36/30/36 | XGF(Q)/50/40/56 | ||
| Awoodda wax-soo-saarka | 100ml | 7000BPH | 7000BPH | 9000BPH | 14000BPH |
| 500ml | 6000BPH | 6000BPH | 7200BPH | 12000BPH | |
| Cabbirka dhalada lagu dabaqi karo | ml | 50/100/250/500/1000 | |||
| Isticmaalka hawada | 0.5-0.7Mpa | 3m3/daqiiqo | 3m3/daqiiqo | 3m3/daqiiqo | 4-6m3/daqiiqo |
| Isticmaalka WFI | 0.2-0.25Mpa | 1-1.5m3/h | |||
| Miisaanka mashiinka | T | 6 | 6.5 | 7 | 9 |
| Cabbirka mashiinka | mm | 4.3*2.1*2.2 | 5.76*2.1*2.2 | 4.47*1.9*2.2 | 6.6*3.3*2.2 |
| Isticmaalka tamarta | Matoorka ugu muhiimsan | 4 | 4 | 4 | 4 |
| oscillator duubista | 0.5 | 0.5 | 0.5 | 0.5*2 | |
| Hawada Ionic | 0.25*6 | 0.25*5 | 0.25*6 | 0.25*9 | |
| Matoorka wareejinta | 0.37*2 | 0.37*2 | 0.37*2 | 0.37*3 | |
| saxan kululaynta | 6*2 | 6*2 | 6*2 | 8*3 | |
Tilmaamaha khadka wax soo saarka:
1.Waxay la kulmi kartaa wax soo saarka cabbirka kala duwan (100-1000ml).
2.Waxay dalbatay dhalada caadiga ah ee PP iyo dhalada PP jilicsan ee is-burburtay.
3. Codso qaababka weel kala duwan: wareegsan, oval, aan joogto ahayn, iwm.
4.Awoodda wax soo saarka sare: kala duwan 4000-15000 dhalo saacaddii.
5.Waxyaabaha cayriin ee qashinka ah ee soo saarista hal dhalada 500 ml PP waxay la mid tahay 0%.
Codsiga isbitaalka:
